Télécharger Imprimer la page

HIKVISION DS-2DE2C200MWG/W Guide De Démarrage Rapide page 13

Publicité

Product appearance is for
reference only and may differ
from the actual product.
Symbol
i. Not necessarily included
accessory.
ii. Variable accessory
amount.
iii. Skip this step if not
required.
Camera Appearance (Page 2 – A)
Indicator
Wi-Fi Camera Indicator:
 Solid red: The camera is starting
up.
 Fast-flashing red: Camera
exception.
 Slow-flashing red: Wi-Fi
connection failed.
 Fast-flashing blue: The camera is
ready for Wi-Fi connection.
 Slow-flashing blue: The camera is
running properly.
4G Camera Indicator:
 Slow-flashing red: The camera is
not activated or 4G network
connection failed.
 Flashing red and blue: The 4G
signal is weak.
 Fast-flashing blue: The camera has
connected to the 4G network.
Cable Description (Page 3 – B)
Note:
The cables vary depending on
different camera models.
1. Network Cable: Connect the
network interface with network
cable.
2. Power Cord: Supports 12 VDC
power supply.
Install the Memory Card (Page 4 – C)
Memory card slot
English
Note:
The slots vary depending on different
camera models.
Install the Camera (Page 6 – D)
Press the release button, remove the
bracket from the back of the camera,
(D1) and mount the camera on the
ceiling or wall:
 Ceiling mounting (D2.1-2.3)
 Wall mounting (D3.1-3.3)
Note:
The installation steps for different
camera types are similar. The
diagrams use one type for
illustration.
Adjust the Antenna (Page 9 – E)
The antenna supports tilt angle
adjustment of 0° to 90° and pan
angle adjustment of 0° to 270°.
Waterproof for Outdoor Installation
(Page 10 – F)
1. Install network cable waterproof
2. Use supplied waterproof tape to
Protective Measures for Outdoor
Installation (Page 11 – G1)
Activate and Access Network
Camera (Page 11 – G2)
Regulatory Compliance and Safety
Information
Read all information and instructions
in this document carefully before
12
Reset button: Press reset button
for about 10 s when the camera is
powering on or rebooting to
restore the default settings,
including the user name,
password, IP address, port No.,
etc.
SIM card slot
Drill template
Bracket
jacket.
protect cable connectors and
unused cables.

Publicité

loading