Publicité
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x plastic shelving unit, unassembled (1-4)
2 x wall attachment (5)
1 x assembly instructions
Technical data
Dimensions: approx. 38 x 23 x 100cm (L x W x H)
Maximum load
5
(per shelf): 5kg
Date of manufacture (month/year):
04/2024
Intended use
The product is for use indoors and is not
intended for commercial use.
Safety instructions
Danger to life!
• Never leave children unsupervised with the
packaging material. Risk of suffocation.
Risk of injury!
• Children are not allowed to play with the item.
In particular, point out to children that the item
is not a toy.
• Do not make any modifications to the product!
• Before using the product check for correct
stability.
• Stand the product on an even surface.
• The product may only be used under adult
supervision and not as a toy.
• The product is not for climbing on or playing
with! Make sure that people, especially chil-
dren, do not pull themselves up on the product
or lean against it. The product may tip over.
• Never stand or sit on the product.
• Secure the product with the wall attachment to
prevent it from tipping over.
• Check whether the wall is suitable for moun-
ting the product. Unsuitable wall surfaces can
lead to injuries.
• Check regularly that all plugs are securely
connected!
• Check the product for damage and wear
before each use. The product may be used
only when in good working order and con-
dition!
• Observe the product's maximum load.
Assembly
1. Place the individual parts of the product on an
even and soft surface. (Warning: Assembling
the product on a hard surface can lead to
scratching both the product and the floor!)
2. Assemble all product parts as shown in
figs. B-G.
3. Install the product on the wall as shown in fig. H
Attention: To prevent tipping over, this item
must be mounted on the wall using the wall bra-
cket (5). Drill a hole in the wall using a drill (not
included in the scope of delivery) and attach the
wall brackets to the wall using suitable mounting
material (not included in the scope of delivery).
Note: Use only suitable mounting materials for
wall mounting. Enquire at a specialist store if
necessary.
Storage, cleaning
When not in use, always store the product clean
and dry at room temperature. Clean only with
water and a mild detergent, and wipe dry after-
wards with a cloth.
IMPORTANT! Never clean the product with
harsh cleaning agents.
GB/IE
13
Publicité
