Using The Unit; Charging Screen - Ingeteam INGEREV RAPID 50 Trio Manuel D'installation Et Usage

Using the unit

11. Using the unit
The charger's operation is managed through the display.
In the INGEREV RAPID 50 Trio it is possible to charge two vehicles at the same time. Both charging sessions can
be viewed on the display independently.
In order to manage the charging process, follow the instructions shown on the display.

11.1. Charging screen

The charging screen displays the following information:
17:25
A
CCS
C
D
22.2 kW
0.4 kWh
371 V
60 A
J
A. Time
B. Language selection
C. Selected socket
D. Power, energy used, voltage and charging
current
E. Charge status
F. Time since the start of the charge
ABT2012IQM01_B - Installation and Operation Manual
Charging
E
56%
I
G. Time remaining to complete the charge
H. End charge button
I. Charge session selection
J. Button for adding a charge session where
possible. If two charge sessions are open, one
or the other can be selected from the bottom
bar.
Ingeteam
EN
ES
FR
IT
EN
B
F
G
H
End
35