Télécharger Imprimer la page

Bosch HMT50 Serie Instructions D'installation page 3

Publicité

Safety
m
Important Safety
Instructions
READ AND SAVE THESE
INSTRUCTIONS
m
WARNING:
When properly cared for, your new appliance
has been designed to be safe and reliable.
Read all instructions carefully before use.
These precautions will reduce the risk of
burns, electric shock, fire and injury to
persons. When using kitchen appliances,
basic safety precautions must be followed,
including those in the following pages.
m
WARNING:
Do not repair or replace any part of the
appliance unless specifically recommended
in the manuals. Improper installation, service
or maintenance can cause injury or property
damage. Refer to this manual for guidance.
All other servicing should be done by a
qualified technician.
APPLIANCE HANDLING SAFETY
Hidden surfaces may have sharp edges. Use caution when
reaching behind or under appliance.
SAFETY CODES AND STANDARDS
This appliance complies with one or more of the following
Standards:
UL 858, The Standard for the Safety of Household
Electric Ranges
UL 923, The Standard for the Safety of Microwave
Cooking Appliances
UL 507, The Standard for the Safety of Electric Fans
ANSI Z21.1, The American National Standard for
Household Cooking Gas Appliances
CAN/CSA-C22.2 No. 113-M1984 Fans and Ventilators
CAN/CSA-C22.2 No. 61-M89 Household Cooking
Ranges
It is the responsibility of the owner and the installer to
determine if additional requirements and/or standards
apply to specific installations.
ELECTRIC SAFETY
Before you plug in an electrical cord, be sure all controls
are in the OFF position.
Do not plug the microwave into the wall until after the
installation is complete. This is to prevent accidentally
turning the microwave on during the installation.
For appliances equipped with a cord and plug, do not cut or
remove the ground prong. It must be plugged into a
matching grounding type receptacle to avoid electrical
shock. If there is any doubt as to whether the wall
receptacle is properly grounded, the customer should have
it checked by a qualified electrician.
If required by the National Electrical Code (or Canadian
Electrical Code), this appliance must be installed on a
separate branch circuit.
Installer - show the owner the location of the circuit breaker
or fuse. Mark it for easy reference.
Be sure your appliance is properly installed and grounded
by a qualified technician. Installation, electrical connections
and grounding must comply with all applicable codes.
RELATED EQUIPMENT SAFETY
Remove all tape and packaging before using the appliance.
Destroy the packaging after unpacking the appliance.
Never allow children to play with packaging material.
Never modify or alter the construction of the appliance. For
example, do not remove leveling legs, panels, wire covers
or anti-tip brackets/screws.
MICROWAVE SAFETY
PRECAUTIONS TO BE OBSERVED BEFORE AND
DURING SERVICING TO AVOID POSSIBLE EXPOSURE
TO EXCESSIVE MICROWAVE ENERGY
(a) Do not operate or allow the oven to be operated with the
door open.
(b) Make the following safety checks on all ovens to be
serviced before activating the magnetron or other
microwave source, and make repairs as necessary:
English 1

Publicité

loading

Ce manuel est également adapté pour:

Hmt57 serieHmb50 serieHmt5750Hmt5060