Publicité
2
3
4
00̲CH452̲ACN̲all.indb Eng-14
00̲CH452̲ACN̲all.indb Eng-14
MEASURING YOUR BLOOD PRESSURE
Plug the air hose
connector into the main
unit.
• Plug the air hose connector
fi rmly into the air hose
socket on the main unit, as
illustrated.
Place the cuff at the height of the heart.
Press the START/STOP switch (the blue switch).
*
If the pressurization value exceeds 280 mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff defl ates, and the power turns off.
1 All digits on the display blink for
approximately one second.
•
All digits displayed is an initial
display, indicating that the monitor is
functioning normal.
The
mark will also be displayed but
this does not indicate that the battery
needs to be replaced.
2
is displayed for approximately one
second.
3 The cuff is pressurized automatically.
Air hose socket
Air hose connector
-
-
Eng 14
2012/09/18 18:49:48
2012/09/18 18:49:48
Publicité
