Publicité
BEFORE INSTALLATION
Be sure that all parts are on hand before proceeding with the installation.
Residual moisture in the bidet at purchase ensures that your product was tested at
the factory with pure water to meet the highest quality standards and performance.
Check the line that connects the toilet tank to the water shut off valve. If it's a rigid
line, you may need to purchase a flexible one to replace it before installation. The
length of the hose and the size of the connections will vary.
Water pressure limit is 10 - 110 PSI. Please use as instructed depending on your
water shutoff and toilet tank connections. Water shutoff valve should be near
installed product.
Please read installation instructions carefully.
CONCEALED TRAPWAY / TOP-MOUNT HARDWARE AVAILABLE
Haven 2000 Stay·Tite
exposed trapway toilet, where the hardware is accessible to be tightened from
below the seat. For concealed trapway installations, a top mounting hardware kit
will be required, which can be added at time of purchase or after purchase from
Bemis Customer Service 888.722.6488 or email at Corp@BemisMfg.com.
hardware is designed for installation with a standard
®
7
Publicité
