Publicité
OPERATION
NIGHT LIGHT
BACKSIDE BACKUP
WATER / DRYER TEMP
WATER TEMP
DRYER TEMP
SEAT TEMP
• If the knob is not fully switched off after a wash, the unit will beep and will not allow
wash functions to be activated .
• When the water temp exceeds 109° F, it will not allow wash functions to be activated .
Unplug and replug the power cord to reset unit and resume operation .
• Seat Temperature Protection - After 5 minutes of occupying seat, seat temp will
automatically switch to ~84°F .
16
(cont .)
While not seated, long press control knob button
to switch between night light settings .
• Mode 1 - Bowl light on and knob light on
• Mode 2 - Bowl light off and knob light on
• Mode 3 - Bowl light off and knob light off
During a power outage, wash functions can still
be used with ambient water temperature and
pressure (if water pressure is still present) .
SIDE CONTROL BUTTONS
SEAT TEMP
QUIET MODE
LED Indicator
During a WASH CYCLE, press the WATER / DRYER TEMP
button repeatedly to adjust water temperature .
During a DRY CYCLE,
button repeatedly to adjust dryer
Press SEAT TEMP button repeatedly to adjust heated
QUIET MODE: Press and hold the "Seat Temp"
button for 3 seconds to disable or re-enable beeping .
The seat must be occupied .
SAFETY FEATURES
Off
Low
press WATER / DRYER TEMP
temperature .
High
seat .
Publicité
