Publicité
CLEANING & MAINTENANCE
PERIODS OF NON-USE
If you do not intend to use this product for an extended period of time,
drain the water from bidet seat .
1 .
Before draining, unplug the power cord and wait 30 minutes until the unit has
cooled down .
2 .
Close water shut-off valve .
3 .
In order to drain water, release seat from toilet, turn bidet over and using a
screwdriver, unscrew drain cap located in the back/center of the seat .
4 .
Turn seat back over right side up to drain water . Replace cap and washer .
Place seat back onto toilet .
5 .
Open the water shut-off valve and plug back in to resume usage .
20
Quick Release
(cont .)
Drain Cap
Publicité
