Publicité
WATER CONNECTION
5.
Remove both plastic caps from bidet
hose prior to connecting to T-valve
and bidet. Connect bidet hose
directly to T-valve located below
toilet tank.
6.
Connect other end of bidet hose to
bidet's water inlet, making sure it's
firmly connected. Do not sharply
bend or twist hose.
7.
Slowly turn on water supply.
8.
Wipe hoses and connectors thoroughly with a towel and carefully observe for
any leaks on all connections for at least 10 minutes.
Gently tighten connections until leakage stops. If any leaks continue, turn
off water supply and check older hoses for damaged or improperly seated
gaskets. Plumber's tape may be used on connections to seal.
9.
Plug the power cord into a dedicated 120V GFCI outlet.
14
(cont .)
Publicité
