EINHELL GE-CG 18/100 Li T Instructions D'origine page 18

3. Proper use
Grass shears:
The equipment is designed for cutting the edges
of lawns and small areas of grass in private and
hobby gardens. The long handle (Fig. 2/Item 5)
may only be used together with the grass shears.
Shrub shears:
The equipment is designed for cutting small
hedges and shrubs in private and hobby gardens.
The long handle (Fig. 2/Item 5) may only be used
together with the shrub shears. Equipment de-
signed for use in private and hobby gardens is
regarded as unsuitable for use in public facilities,
parks and sports centers, along roadways, or in
agriculture and forestry. The operating instructions
as supplied by the manufacturer must be obeyed
to ensure that the equipment is used properly.
Warning! This equipment must not be used
for composting purposes (shredding) as this
could result in injury or damage to property.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case
of misuse. The user / operator and not the manu-
facturer will be liable for any damage or injuries of
any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Speed n₀ .............................................. 1200 rpm
Cutting width grass shears ..................... 100 mm
Cutting length shrub shears ................... 200 mm
Cutting thickness shrub shears .................. 8 mm
Power-X-Change lithium-ion rechargeable
battery
Voltage: .................................................. 18 V DC
Capacity: ................................................... 2.5 Ah
Number of cells: ............................................... 5
Important!
The equipment is allowed to be used only with the
lithium-ion rechargeable batteries of the Power-X-
Change series!
Anl_GE_CG_18_100_Li_T_SPK13.indb 18 Anl_GE_CG_18_100_Li_T_SPK13.indb 18
GB
Charging unit
Mains voltage ................... 200-250 V ~ 50-60 Hz
Output
Rated voltage ........................................ 20 V d. c.
Rated current ....................................... 3000 mA
Important!
The charging unit is allowed to be used only for
the lithium-ion batteries of the Power-X-Change
series!
Danger!
Sound and vibration
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Guaranteed sound power level L
Shrub shears
Sound and vibration values were measured in
accordance with EN 62841.
Sound pressure level L
Uncertainty K : ............................................ 3 dB
pA
Measured sound power level L
Uncertainty K : ........................................... 3 dB
WA
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
Vibration emission value a
Uncertainty K = .......................................1.5 m/s
Grass shears
Sound pressure level L
Uncertainty K : ............................................ 3 dB
pA
Measured sound power level L
Uncertainty K : ........................................... 3 dB
WA
Vibration emission value a
Uncertainty K = ...................................... 1.5 m/s
The stated vibration emission levels and stated
noise emission values were measured in ac-
cordance with a set of standardized criteria and
can be used to compare one power tool with
another.
The stated vibration emission levels and stated
- 18 -
: ....... 87 dB(A)
WA
: .................. 75.2 dB(A)
pA
: ....... 83.2 dB(A)
WA
(max.) = .......2.6 m/s
2
h
2
: .................. 73.6 dB(A)
pA
: ....... 81.6 dB(A)
WA
(max.) ...... ≤ 2.5 m/s
2
h
2
23.05.2024 09:36:13 23.05.2024 09:36:13