General Information - WIKA A2G-10 Mode D'emploi

1. General information

1. General information
The pressure gauge described in the operating instructions has been
■
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental
GB
criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
These operating instructions contain important information on
■
handling the pressure gauge. Working safely requires that all safety
instructions and work instructions are observed.
Observe the relevant local accident prevention regulations and
■
general safety regulations for the pressure gauges range of use.
The operating instructions are part of the instrument and must be
■
kept in the immediate vicinity of the pressure gauge and readily
accessible to skilled personnel at any time.
Skilled personnel must have carefully read and understood the
■
operating instructions, prior to beginning any work.
The manufacturer's liability is void in the case of any damage caused
■
by using the product contrary to its intended use, non-compliance
with these operating instructions, assignment of insufficiently quali-
fied skilled personnel or unauthorised modifications to the pressure
gauge.
The general terms and conditions, contained in the sales documen-
■
tation, shall apply.
Subject to technical modifications.
■
Further information:
■
- Internet address::
- Relevant data sheet:
4
www.wika.de / www.wika.com
www.air2guide.com
PM 07.40 and PV 17.40
WIKA operating instructions air2guide models A2G-10, A2G-15