14. Charging station operation
For the hover button to work correctly, the thumb must cover the split part and the bottom of
the lighting strip.
Split
If the key lock has been activated in the charging station configuration/setting, then for any action on the station such as vehicle charging, mode
change, forcing the charge, charge release, the station must be in the unlocked position (key in the ON position).
14.1. Selecting the charging mode
The XEV1Kxx charging stations have three charging modes:
1. Immediate charging mode:
This mode charges an electrical vehicle as soon as it is connected.
2. Deferred charging mode:
In this mode, the start of charging is delayed and only permitted during reduced tariff time periods.
Charging stops when it is complete.
3. Exclusive deferred charging mode:
In this mode, charging is delayed and only permitted during reduced tariff time periods.
Charging stops when the reduced tariff time period comes to an end, even if charging is not complete.
Follow the steps below to select these modes:
1
There is no electric vehicle connected to the charging
station.
3
To display the current charging mode, place your thumb on the hover button until the lighting strip flashes (min. 10 secs)
then remove it.
4
To switch from one mode to the other, place your thumb on the hover button for 2 seconds then remove it.
The lighting strip changes colour, indicating the new charging mode selection.
46
All manuals and user guides at all-guides.com
Incorrect
Hover button
2
10 secs.
2 secs.
The charging station is unlocked and the lighting strip
has a steady green light.
Flashing yellow
Immediate charging mode
Flashing blue
Deferred charging mode
Flashing white
Exclusive deferred charging
mode
Immediate
charging mode
Exclusive deferred
charging mode
Correct
ON
Deferred charging
mode