Sleep Function - LENCO PR2700 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3. Press "CLOCK" button.
4. Press "CLOCK" button again to adjust the minutes with the SKIP+/SKIP - buttons
5. Press "CLOCK" button again to adjust the YEAR with the SKIP+/SKIP - buttons
6. Press "CLOCK" button again to adjust the MONTH with the SKIP+/SKIP - buttons
7. Press "CLOCK" button again to adjust the DAY with the SKIP+/SKIP - buttons
8. Press "CLOCK" button again to adjust the CT (Central Time) on/off function with the SKIP+/SKIP - buttons
9. Press "CLOCK" again to store the clock settings.
10. NOTE: When during clock setting no buttons are pressed within 10 seconds, the system will exit clock setting
mode without storing any adjustments.
5.

SLEEP FUNCTION

Configuring the sleep mode.
a) You can press the SLEEP button in standby or when powered on.
b) Press FUNCTION button to select the desired source.
c) Multiple press the "SLEEP" button to select how many minutes the unit will play music before it will go into
standby mode: 5101530456090120OFF (Default is OFF.) after selecting the desired time, wait
to select automatically. The display will show 'SLEEP' to indicate the sleepmode is active.
d) When sleepmode is activated, you can display the sleeptime by pressing the "SLEEP" button.
e) The sleep function can be turned off by long press on the "FUNCTION" button or selecting "OFF" by pressing the
"SLEEP" button.
Remark:
1. If sleep time is ended, the unit will go to standby. when an alarm arrives at the same time as sleep ends,
sleep will terminate and alarm goes on. If sleep ends earlier then the alarm, the alarm will turn on the set; if
the alarm is earlier then the sleep ends, sleep will terminate and alarm switches on.
2. There is a one-minute sleep countdown where the volume drops down gradually. If power on again, the unit
will return to the previous gradually drop down volume setting.
6.
Alarm Setting
Follow these steps to set the alarm:
In standby mode, press and hold the MEMORY/ALARM button for 2 seconds. The alarm time will be shown on the
display and the hours will start blinking.
24

Publicité

Table des Matières
loading

Table des Matières