Functions; Switching Off The System - LENCO PR2700 Mode D'emploi

1. Introduction

Functions

LCD Layout
2. POWER ON
2.1. Switching on the system
In standby mode, press the FUNCTION button to turn on the unit with the last selected source (Default is tuner)

2.2. Switching off the system

Press and hold the FUNCTION button for 2 seconds to switch to standby mode. The display will show the time
Note: the dim and alarm setting are still functional in the standby mode.
3. SOURCE SELECT
When the unit is on, Press the FUNCTION button to select the desired music source (Tuner  USB  AUX...)
Tuner: When TUNER mode is selected, `TUNER´ will be displayed for a few seconds. Then the display will show the
FM frequency.
USB: When USB mode is selected, `USB´ will be displayed for a few seconds. Then the display will show the track
number and play time.
Aux: When AUX mode is selected, `AUX´ will be displayed. The device connected to the AUX connection will be heard.
4. CLOCK
If powered on for the first time, the clock display will show "0:00"
Setting the clock:
1. The Clock can be set in Standby only. Press and hold MEMORY button for 2 seconds. 24H or 12H clock mode
show.
2. Press SKIP+/SKIP- button to select 12H or 24H clock mode.
23