Alarm On/Off - LENCO PR2700 Mode D'emploi

a) Adjust the hour time with the SKIP+/SKIP- buttons.
b) Press the MEMORY/ALARM button again. The minutes will start to blink.
c) Adjust the minutes with the SKIP+/SKIP- buttons and press the MEMORY/ALARM button. Now you can
select the desired SOURCE (BUZZER, USB or TUNER) and press the MEMORY/ALARM button to confirm the
selected source. Press the MEMORY/ALARM button again. Select to the desired SOURCE (1.BUZZER,
2.TUNER or 3.USB)
d) The weekday(s) will start to blink.
Press SKIP+/SKIP- buttons to select the alarm frequency among "DAILY", WEEKDAYS","WEEKENDS", "ONCE" and
"VOLUME". Then press the MEMORY/ALARM button to store the setting.
Remark:
1. When no buttons are pressed within 10 seconds, during alarm setting, the unit will exit the alarm setting mode
without storing changes.
2. Alarm1 time Default is 0:00
3. WEEKENDS: The alarm is activated only on weekends
4. WEEKDAYS: The alarm is activated only on weekdays
5. ONE DAY: The alarm is activated only on that day
6. DAILY: The alarm is activated everyday

Alarm On/Off:

If no alarm is active, press the MEMORY/ALARM button to make the ALARM active. The corresponding alarm icon
will show on the display. (You can only do this when the unit is in standby mode). Pressing the MEMORY/ALARM
button again will turn the alarm off and the alarm icon on the display will disappear.
25