Energy Saving - LENCO PR2700 Mode D'emploi

3. Use the SKIP+/SKIP- buttons to select the desired track.
4. Press the MEMORY/ALARM button to store the selected track on the current position. The display will show P02.
5. You can create a program of up to 20 tracks by repeating steps 3 and 4.
6. Press the RDS/PLAY button to start playback of the programmed list
NOTE:
- Compatible storage device (up to 32GB).
- Please do NOT use a USB extension cable to connect your USB flash drive. Such cable can pick up additional
interference which can corrupt the data flow.
- Due to some USB drive manufacturer's non-compliance with the full USB 1.1/2.0 standard. A small
percentage (about 5%) of USB flash drive might not be compatible
11. AUX IN
This allows you to connect an external player's sound through your unit.
1. Plug a 3.5mm audio cable (not included) into your external player's line out and the other end into the AUX
IN Jack at the right of the unit.
2. The unit will automatically enter AUX mode.
3. Start your external player to play music, The unit will output the sound. Note: when no sound can be heard,
check the volume level of both units.
4. To return to another mode, disconnect the audio cable from the unit

12. ENERGY SAVING

Due to ErP stage two requirement and protect the environment, the unit will switch to the standby mode
Automatically once no music has been playing over 15 minutes.
28