Operation - EuroGarden HFX600DT-DELUX Manuel Du Propriétaire

Operation

HFX600DT-DELUX,750DT-DELUX ·
HF600DT-PRO,750DT-PRO ·
HF580DT-L,750DT-L
A B
HF750FS-PRO · H550S,750S
B
A
A. Throttle Lever and Set
Lever
B. Front Handle
Setting the Angle of Rear handle
HFX600DT-DELUX,750DT-DELUX ·
HF600DT-PRO,750DT-PRO ·
HF580DT-L,750DT-L
●
Top trimming
●
Side trimming
●
Hold the throttle lever, the
set lever and the front handle
while operating the hedge
trimmer.
●
The rear handle can be set in
five positions as desired. To
make it free for positioning,
pull the lock lever.
(See the illustrations at the
left.)
Before adjusting the handle,
be sure to stop the engine.
●
Keep the rear handle upward
during operation, irrespective
of position of the cutting blade.
Hold the handle firmly with both
hands, and keep the machine
body horizontal.
Then, slightly incline the cutting
blade in the cutting direction and
trim the shrub while swaying as if
drawing an arc.
Hold the machine body vertical
and trim the shrub upward from
the bottom keeping the cutting
blade as much apart from your
body as possible.
11