Beurer medical BM 44 Mode D'emploi page 15

Manufacturer
Permissible storage temperature and hu-
Storage
55°C
midity
-20°C
RH ≤90%
Permissible operating temperature and
Operating
40°C
humidity
10°C
RH ≤90%
Keep dry
SN Serial number
The CE labelling certifies that the product
complies with the essential requirements
0483 of Directive 93/42/EEC on medical prod-
ucts.
Advice on use
In order to ensure comparable values, always measure
your blood pressure at the same time of day.
Before every measurement, relax for about five minutes.
If you want to perform several measurements on the same
person, wait five minutes between each measurement.
Do not take a measurement within 30 minutes after eating,
drinking, smoking or exercising.
Repeat the measurement if you are unsure of the meas-
ured value.
The measurements taken by you are for your information
only – they are not a substitute for a medical examination!
Discuss the measurements with your doctor, and never
base any medical decisions on them (e.g. medicines and
their administration)!
Do not use the blood pressure monitor on newborns,
pregnant women or patients with preeclampsia.
Cardiovascular diseases may lead to incorrect measure-
ments or have a detrimental effect on measurement ac-
curacy. The same also applies to very low blood pressure,
diabetes, circulatory disorders and arrhythmias as well as
chills or shaking.
The blood pressure monitor must not be used in connec-
tion with a high-frequency surgical unit.
Only use the device on people who have the specified up-
per arm measurement for the device.
Please note that when inflating, the functions of the limb
in question may be impaired.
During the blood pressure measurement, blood circulation
must not be stopped for an unnecessarily long time. If the
device malfunctions, remove the cuff from the arm.
Avoid any mechanical restriction, compression or bending
of the cuff line.
15