Publicité
Before filling your appliance
Before storing foods in your appliance, turn it on and wait for 24 hours, to make sure it is working
properly and to allow it to reach the correct temperature.
Door right-left change
Depending on your needs, you can change the opening side of the door. You can choose to open it
from the right or from the left. To change the opening side, follow the instructions.
Warning:
•
Before changing the opening side of the door, ensure that the unit is empty and unplugged.
•
Any removed part must be kept until the end of installation.
•
Do not lay the device down on the floor, you could damage the cooling system.
•
Get help from one or two more people.
Tools required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
1. Remove the top right hinge cover.
2. Undo the screws. Then remove the hinge bracket.
3. Remove the top left screw cover.
4. Move the core cover from left side to right side. And then lift the upper door and place it on a
padded surface to prevent it from scratching.
5. Unscrew bottom hinge. Then remove the adjustable feet from both sides.
6. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
7. Detach the door's gaskets and then attach it after rotating 180°.
8. Refit the bracket fitting the bottom hinge pin. Replace both adjustable feet.
9. Place the door back on. Ensure the door is aligned horizontally and vertically so that the seals
are closed on all sides before finally tightening the top hinge.
10. Insert the hinge bracket and screw it to the top of the unit.
11. Use a spanner to tighten it if necessary.
12. Put the hinge cover and the screw cover back.
26
Publicité
