Publicité
10.1.l - Battery charger and digital
instrument
(Fig. 24)
WARNING:
The machine leaves production with a
standard configuration for operation with
"Sonnenschein" gel batteries.
WARNING:
Disconnect the battery plug from the
socket.
-
Remove the cover (61 Fig. 22) by un-
screwing the screws (62 Fig. 22).
Standard configuration with Sonnen-
schein gel batteries
-
Remove the cap (66) located under the
batter charger (16).
-
Position the switches (SW1 and SW2) as
shown in figure "A".
It is possible to modify the configuration as
follows:
Configuration for acid batteries
-
Remove the cap (66) located under the
battery charger (16).
-
Position the switches SW1 and SW2) as
shown in figure "B".
configuration
EN-13
EN
Publicité
