SEFRAM MW 3517BF Notice D'utilisation page 41

MIN/MAX
MIN
MAX
MIN
MAX
MIN
Button > 2 sec
Press
MAX
to exit the MINMAX mode
The MAX/MIN mode records the min and max input values.
When the input goes below the recorded min value or above the
recorded max value, the meter records the new value. Press
Hold button to pause the recording.
Volt Seek
Sensor
position
Volt seek
Press MIN/MAX button for over 2 sec. to enter / exit Volt Seek
mode. Press MIN/MAX button to switch high/low sensitivity.
 Warning
The Volt Seek LED indicates the electric field. If the Volt Seek
LED is not on, voltage could still be present.
Press
Press
MIN
MAX
Press
MIN
MAX
Press
MIN
MAX
Do not hold across this
line when sensing the
hazardous voltage.
MIN
MAX
2 Sec
12