System - Pioneer XW-HT1 Mode D'emploi

Connecting up
Important
• When connecting, make sure that all
components are switched off and
unplugged.
• Do not use the supplied cords or AC
adapter for any other purpose than that
described here.
1 Connect the TV IN jacks on the
transmitter to the stereo audio output
jacks on your TV or mini-component

system.

Use the supplied RCA/phono stereo audio
cable to do this.
2 If you have a subwoofer, connect the
SUBWOOFER OUT jack on the transmitter
to the input jack on your subwoofer.
Use a commercially available RCA/phono
mono audio cable to do this.
• If you don't own a subwoofer, you can
omit this step and still achieve convincing
surround sound from your system.
• Please refer to the operating instructions
supplied with your subwoofer when
connecting.
3 Connect the supplied AC adapter to
the DC IN inlet on the rear panel of the
transmitter, then plug into a power
outlet.
4 Connect the wireless speaker AC
power cord to the AC IN inlet on the rear
panel of the wireless speaker, then plug
into a power outlet.
03
17
En