Pioneer XW-HT1 Mode D'emploi page 20

04 Listening in surround sound
Using the front panel controls
You can also use the SURROUND MODE
button on the transmitter to switch between
surround modes.
Press repeatedly to select the surround
mode you want:
DVD
WIRELESS OFF*
W.STEREO
TV
TV MUSIC
TV CINEMA
* Automatically switches to DVD input
when selected.
FAQ
• The wireless speaker is switched on and
connected, but there is still no sound!
Make sure the surround mode you've
selected corresponds with the input
you're using (DVD or TV).
20
En
SURROUND MODE
VOLUME CHANNEL SURROUND MODE
CS II CINEMA
CS II MUSIC
W.STEREO
• The wireless speaker doesn't seem to have
a particularly strong surround effect.
You may have to adjust the level of the
wireless speaker. Experiment by
increasing the level slightly for a more
pronounced surround effect.
Note
• When connected to the TV input, there is
no sound from the TV output.
• No sound is output from the wireless
speaker when the input signal is mono
using some surround modes. We
therefore recommend using different
surround modes depending on whether
the signal is mono or stereo. The table
below summarizes which surround
modes are compatible with mono and
stereo signals.
DVD
DVD
DVD
input
DVD
TV
input
Stereo
Surround
signal
mode
CS CINEMA
CS MUSIC
W.STEREO
CINEMA
MUSIC
W.STEREO
Mono
signal