Publicité
1. Open the battery compartment cover and slide the battery vertical down as Fig 6 shows.
2. Insert the safety key into the slot and close the battery compartment cover as Fig 7 shows.
Fig.6
To Remove Battery Pack
1. Remove safety key.
2. Press and hold the battery latch button at the bottom of the battery
pack.
3. Remove battery pack from the product.
NOTICE: Make sure that the latch on the snow blower snaps into place
and that the battery pack is secured to the unit before starting operation.
To Start Snow Blower
1. Install the battery pack to snow blower.
2. Insert safety key and close the cover.
3. Press ON/OFF button and the light will turn green.
4. Squeeze the auger trigger, the auger rotates. Squeeze the drive trigger, the machine will go. The
auger will stop when the machine is reverse.
Note: Squeeze the auger trigger or the drive trigger within 3 seconds after pressing ON/OFF
button to start. Restart if over 3 seconds.
To Stop Snow Blower
1. Release the auger trigger.
2. Remove safety key.
3. Remove the battery pack and store in a secure location out of the reach of children.
WARNING: The thrower will turn off automatically after 5 seconds of stop operation.
Fig.7
9
Publicité
