Publicité
To engage drive trigger
1. Squeeze the drive trigger against the left or right handle to engage the wheel drive for propelling
unit.
2. Release trigger to stop movement.
Adjusting the Chute
The chute can be adjusted to change both the direction and the distance of the
discharged snow to assist you in moving snow away from one area and placing it in
another.
The throwing distance of the snow blower is adjusted by moving the handle on the
panel. Moving handle to forward and reverse on the panel to adjust the deflector
degree.
WARNING: Do not force the chute so far forward that a gap appears between
the deflector and the chute itself. Snow or other debris could be thrown through the gap and back at
the operator, resulting in serious personal injury.
WARNING: Do not adjust the chute deflector while the bail switch is engaged. Always release
the bail switch before adjusting the chute deflector.
Panel Control
WARNING! AVOID INJURY. Read and understand the entire safety section before
proceeding.
Snow blower controls and features are described below.
IMPORTANT! DO NOT change motion from forward to reverse with trigger engaged.
10
Publicité
