Publicité
W
min
WARNING: To ensure safety and reliability, all repairs should be performed by a qualified service
technician.
SAFE OPERATION PRACTICES FOR SNOW BLOWER
DANGER: This snow blower is capable of amputating hands and feet and throwing objects. Failure
to observe the following safety instructions could result in serious injury.
FOR ALL SNOW BLOWERS
•
Do not use on graveled surface.
•
Keep Children Away – All visitors should be kept a safe distance from work area.
•
Dress Properly – Do not wear loose clothing or jewelry. They can be caught in moving
parts.
•
Wear rubber boots when operating the snow blower.
•
Keep hands away from moving parts.
•
Keep guards in place and in working order.
•
Do not Force Snow Blower – It will perform better and safer at the rate for which it was
designed.
•
Do always not Overreach – Keep proper footing and balance.
•
If the snow blower strikes a foreign object, follow these steps:
1. Stop snow blower. Release the switch.
2. Remove the battery pack and safety key.
3. Inspect for damage.
4. Repair any damage before restarting and operating the snow blower.
•
When not in use, snow blowers should be stored indoors in dry, locked-up place – out of reach of
children.
TRAINING
•
Read, understand, and follow all instructions on the machine and in the manual before operating
this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know
how to stop the unit and disengage the controls quickly.
•
Never allow children to operate the equipment. Never allow adults to operate the equipment
without proper instruction.
•
Keep the area of operation clear of all persons, particularly small children.
•
Exercise caution to avoid slipping or falling, especially when operating the snow blower in
reverse.
PREPARATION
•
Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds,
boards, wires, and other foreign objects.
•
Do not operate the equipment without wearing adequate winter garments. Avoid loose-fitting
clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery
surfaces.
•
Never attempt to make any adjustments while the motor is running (except when specifically
recommended by manufacturer).
•
Always wear safety glasses or eye shields during operation or while performing an adjustment or
repair to protect eyes from foreign objects that may be thrown from the machine.
Watt
Minutes
Direct Current
Power
Time
Type or a characteristic of current
5
Publicité
