Livestrong LS8.0E Manuel Du Propriétaire page 7

ASSEMBLY STEP 4
LS10.0E SHOWN
ALL
MODELS
BOLT (P)
SPRING WASHER (Q)
FLAT WASHER (R)
PEDAL ARM BRACKET
12
LS8-LS10-LS13E-OM_Rev1.3.indd 12-13
HARDWARE BAG 4 CONTENTS :
FLAT WAVY
WASHER (N) WASHER (O)
27 mm 29 mm
Qty: 4 Qty: 2
SPRING WASHER (Q) FLAT WASHER (R)
15.4 mm 20 mm
Qty: 2 Qty: 2
Open hardware bag 4.
A
Slide 1 flat washer (n), 1 wavy
B
washer (o) and another flat washer
(n) onto the lower link arm.
Slide the lower link arm into the
C
pedal arm bracket.
Attach the lower link arm to the
D
FLAT WASHERS (N) pedal arm bracket using 1 flat
WAVY WASHER (O)
washer (r), 1 spring washer (Q)
LOWER LINK ARM
and 1 bolt (p).
Repeat steps B–D on the opposite side of
E
the elliptical.
ASSEMBLY STEP 5
BOLT (P)
RUBBER
20 mm
WASHER (S)
Qty: 2
26 mm
Qty: 2
CONSOLE MAST
LOWER HANDLEBAR
HARDWARE BAG 5 CONTENTS :
FLAT WASHER (T) FLAT WASHER (H) SPRING WASHER (B)
25 mm 20 mm 15 mm
Qty: 4 Qty: 4 Qty: 2
Open hardware bag 5.
A
LS10.0E SHOWN
Slide 1 rubber washer (s) and 1 flat
B
washer (t) onto the console mast.
Slide lower handlebar onto console
C
RUBBER WASHER (S) FLAT WASHERS (T) mast and attach using 1 flat washer (t),
1 flat washer (h), 1 handlebar cap, 1
FLAT WASHERS (H)
flat washer (h), 1 spring washer (b)
BOLT (U)
and 1 bolt (u).
Repeat steps B–C on the opposite side of the
D
elliptical.
HANDLEBAR
CAP
SPRING
WASHER (B)
ALL
BOLT (U) MODELS
20 mm
Qty: 2
13
7/22/10 1:48 PM