Publicité
Product Overview
EN
Charging Base
3
4
Display Screen
1
2
3
4
4.
1.
Turbo Mode
2.
Auto Mode
3.
Charging Indicator
• Breathing Orange : Battery level ≤ 20%
• Breathing Green: Battery level ＞ 20%
Note: If the appliance is not working properly, the screen display will show an error message. Please
5
5
refer to the troubleshooting table to find your solution.
1
1. Charging Contacts
2
2. Air-Drying Outlet
3. Air-Drying Inlet
4. Power Cord
5
6
7
8
5.
Error Messages
Suction Mode
6.
Insufficient water in the
Drying Mode
Clean Water Tank
7.
Low Battery Indicator
Used Water Tank full
• Solid Orange: Battery level ≤ 20%
Blocked tube
• Solid Green: Battery level ＞ 20%
8.
Brush roller stuck
Dust Concentration Indicator
The color of the curve changes with the
amount of dust in real time.
Installation
Installing the Storage Box
Install the storage box onto the charging base.
Installing the Handle
Insert the end of the handle vertically into the port on the top of the vacuum as
indicated until you hear a click.
Click
Note: To disassemble, press the contacts in the hole on the back of the appliance with the
appropriate tool and pull the handle upwards at the same time.
EN
2
1
6
6
Publicité
