Publicité
EN Use
•
Roll the appliance on its wheels and from its control box to the desired heating location.
•
Let the heat transfer fluid to descend for 2-3 minutes after installing the feet.
•
Place the appliance on a flat and stable surface.
•
Avoid exposing the appliance to direct sunlight as much as possible so as not to disrupt the thermostat
setting and prevent the appliance's color from tarnishing.
•
Unwind the power cable completely, check there is no damage on it, and plug it into an electric socket
outlet equipped with a safety ground protection.
WARNING: DO NOT USE A POWER STRIP OR AN EXTENSION LEAD.
•
Please ensure that the appliance rated power is lower than the power managed by your home
installation socket outlet.
WARNING: IF THE POWER CABLE BECOMES VERY HOT, IT MEANS YOUR
HOME INSTALLATION IS NOT ABLE TO MANAGE THE APPLIANCE RATED
POWER. TURN OFF THE APPLIANCE, UNPLUG IT AND CHECK YOUR
ELECTRIC INSTALLATION WITH A QUALIFIED ELECTRICIAN BEFORE TO
RE-USE THE APPLIANCE.
•
Do not move the appliance in use. Let is cool down, stand-by and unplug it before to move or roll it.
1. Clockwise the heating power levels knob to the minimum (I), medium (II) or maximum (III) power level
desired according to your needs.
A maximum power level (III) is recommended for a fast room heating.
After the desired temperature is reached according to the mechanical thermostat knob setting, please
choose power levels medium (II) or minimum (I) to reduce energy consumption and prevent the room
becoming overheated.
2. Set the mechanical thermostat from - to +. The light indicator behind the heating power level selected will
be highlighted when the heating element is in action.
If the thermostat temperature is set at the maximum, the heater will heat almost or fully in continuous.
Please adapt the setting according to your needs in order to reduce energy consumption and avoid room
overheating.
5059340980515_MNL_IN_V03.indd 59
5059340980515_MNL_IN_V03.indd 59
59
30/04/2024 9:43:30 pm
30/04/2024 9:43:30 pm
Publicité
