Publicité
STEP 2: ASSEMBLY MODE
As shown in the provided illustration:
Position the left and right columns against
the designated spot. Secure the left and
right columns to the base using the 8*45
screws and the C flat washer. Then, fasten
them with the B.8 *16 screws and the D
flat washer. The opposite side should be
assembled in the same manner.
STEP 3.
As depicted in the provided illustration: Position the armrest frame flush with the column. Secure the left
and right sides using the B.M8*16 screws and D flat pads, respectively. Once secured, adjust the frame
into its final position using the three-piece adjuster. Ensure to adhere to any provided warnings during
this process.
ENGLISH
6.
3 LEVELS OF INCLINATION
ADJUSTMENTS
Publicité
