Abicor Binzel ABIPLAS CUT Mode D'emploi page 37

®
ABIPLAS CUT
®
1
ABIPLAS CUT 70
Torch circular circular guide set small
1
Torch circular guide
Fig. 2
Torch carriage CUT 70 and CUT 110/150
Spacer
Mount for machine cutting torch
Mount for machine cutting torch
Fig. 3
7 Operation
7.1 Equipping the torch body
• without circular guide
• Distance spring
• Bevel nozzle
• Hole piercing cap
• The machine cutting torches ABIPLAS
fastened to the machine with a mount.
• The machine cutting torch is clamped by means of a clamping sleeve on
the marked clamping area SB1. In the absence of a clamping sleeve, it can
be clamped to SB2.
 see Fig. 7 on page EN-17
WARNING
In the case of a split protection cap, the cap body and spatter protector
make up one functional unit. For safety reasons, the plasma-cutting torch
equipped with the cap body must not be used without spatter protector.
Non-observance can result in injuries and machine damage.
®
ABIPLAS CUT 110 and 150
Torch circular guide set large
2
®
CUT MT 70/110/150 can be
7 Operation
2
EN - 11