Safety Instructions; Emergency Information - Abicor Binzel ABIPLAS CUT Mode D'emploi

®
ABIPLAS CUT

3 Safety instructions

3.1 Classification

3.2 Emergency information

The machine cutting torch is marked with a label on the handle tube, for
®
example ABIPLAS CUT MT 70 .
Please observe the attached safety instructions.
The warning signs used in the operating instructions are divided into four
different levels and are shown prior to specific work steps. Arranged in
descending order of importance, they have the following meaning:
DANGER
Describes imminent threatening danger. If this danger is not avoided, fatal or
extremely critical injuries will be the result.
WARNING
Describes a potentially dangerous situation. If not avoided, serious injury
can be the result.
CAUTION
Describes a potentially harmful situation. If not avoided, it may result in slight
or minor injuries.
NOTE
Describes the risk of impairing work results or the risk that the work may
result in material damage to the equipment.
In case of emergency, immediately interrupt the following supplies:
• Electricity, gas
Further measures can be found in the "Power source" operating instructions or
in the documentation of further peripheral devices.
3 Safety instructions
EN - 7