Publicité
Problem
bE
Oversudsing caused by improper detergent, such as liquid dish soap.
• Do not use hand dishwashing liquids. Only use detergents which are designed for use in
• A
• To remove detergent residue in the tub, pour approximately 4 oz ~ 8 oz (100 ml ~ 200 ml)
Failure to level dishwasher.
• Make sure that the appliance is properly leveled.
Water leakage
AE
• Turn off the water supply to the dishwasher and call an LG Electronics Customer
• The dishwasher makes an alert sound for 10 seconds, and runs the drain pump
Excessive Water supplied.
FE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Heater circuit failure.
HE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
Water temperature sensor error
tE
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
LE
Wash motor error
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
NE
Vario motor error
• Please call an LG Electronics Customer Information Center at 1-800-243-0000 (U.S.A.) 1-
N:
U:
d:
t
Test mode is selected.
#,
#,
#,
#
• This is not an error code. This code is used when testing the dishwasher. Power the unit off
(# is a number.)
LO
L1
Lz
L3
L4
Rinse aid level setting mode is selected.
,
,
,
,
• This is not an error code. This code indicates the current rinse aid level. For more
CL
Control Lock is activated.
• This is not an error code. This code indicates that the control lock is activated. Press and
automatic dishwashers.
bE
error can appear if dishes soiled with a lot of foamy food, such as whipped cream, are
loaded in the appliance. To clear the error, turn the appliance off and start a new cycle.
of milk into a shallow bowl, place it in the upper rack and then run the appliance on the
Auto cycle.
Information Center at 1-800-243-0000 (U.S.A.) or 1-888-542-2623 (Canada).
intermittently. If power is turned off to the machine, the machine powers back on
automatically until the AE error is resolved.
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
888-542-2623 (Canada).
and on and the code will disappear.
information, refer to the Adding Cleaning Products section.
hold Flex Zone and High Temp. buttons simultaneously for three seconds.
Possible Cause & Solution
TROUBLESHOOTING
37
Publicité
