DS Produkte BL9253 Mode D'emploi page 17

4. Fit the blending jar into the blade unit from below (2). Make sure that the catches on the jar
fi t correctly into the corresponding recesses on the blade unit.
10. You can close the jar by using the encloses cap (4).
If your smoothie is too vicious, just add a little fruit juice or mineral water.
Bon Appetit!
In order to fi t the blending jar correctly into the blade
unit, pay attention to the markings on the jar. The arrow
marking on the jar has to point at the marking of the open
lock on the blade unit as the catches of the jar and the
recesses of the blade unit are only facing each other in
exact that position. Like that the blending jar can easily be
fi tted into the blade unit.
5. Turn the blending jar clockwise til the arrow marking points
exactly at the marking of the closed lock. You may have to exert
a little force to fi t the blender securely.
6. Swivel the jar with the motor unit upwards (1). The device starts
to operate.
7. After approx. 10-20 seconds, press the safety button (8) and
swivel the jar with the motor unit downward.
8. Wait several seconds until the liquid in the jar has gathered at
the bottom.
9. Remove the jar from the device by turning it counterclockwise
til the arrow marking points at the marking of the open lock on
the blade unit. Pull the jar downwards off the device.
17