ENGLISH
Gas Hookup
LP Gas Supply
• The pressure regulator and hose assembly supplied with LP models
must be used. Replacement pressure regulators and hose assemblies
must be those specified in this manual.
• The LP gas supply cylinder used with LP models must be constructed
and marked in accordance with the specifications for LP gas cylinders
of the U.S. Department of Transportation (DOT). Specifications for
LP-Gas Cylinders, or the Standard for Cylinders, Spheres and Tubes
for Transportation of Dangerous Goods and Commission, CAN/
CSA-B339, as applicable
• Cylinders must be stored outdoors in a well ventilated area out of the
reach of children. Disconnected cylinders must have threaded valve
plugs tightly installed and must not be stored in a building, garage or
any other enclosed area.
• Storage of this appliance indoors is permissible only if it has been
disconnected from its fuel supply (natural gas line or LP gas cylinder).
• The LP gas cylinder supply system must be arranged for vapor
withdrawal.
• The LP gas cylinder used must include a collar to protect the cylinder
valve.
• When an LP model is not in use, the LP gas must be turned off at the
supply cylinder.
• The specific size and capacity of the cylinder(s) to be used: 20 lb. or
hard plumbed to propane tank.
IMPROPER INSTALLATION, ADJUSTMENT, ALTERATION SERVICES,
OR MAINTENANCE CAN CAUSE INJURY OR PROPERTY DAMAGE.
REFER TO AND UNDERSTAND THIS MANUAL. FOR ASSISTANCE
OR ADDITIONAL INFORMATION CONSULT A QUALIFIED
INSTALLER, LICENSED TECHNICIAN OR THE GAS SUPPLIER.
8