Publicité
REVERSING THE DOOR
IMPORTANT: THIS OPERATION REQUIRES AT LEAST 2 PERSONS.
INSTRUCTIONS
1. Open the door at a 90 degree angle, take out 2 screws from lower door axis (3), and
remove and pull out the door.
2. Set the door aside in a safe place and take out decorative nail (7) from top of door frame.
Remove the 2 screws (4) at bottom and take out the Extrusion-board of lamp switch (5).
Then install Extrusion-board of lamp switch (5) at top of door frame, and use spare the
decorative nails to block the hole at top of door frame.
3. Unscrew the 3 screws (8) from top hinge (right) (6) and take out the right top hinge.
4. Remove the decorative nails (10) from left top of cabinet and install the spare top hinge
(Left) (9) at left top of cabinet using the 3 screws.
11
25
Publicité
