Publicité
3. OPERATING YOUR APPLIANCE
OPERATING CONDITIONS
Proper operation of the appliance is guaranteed only if the following conditions are met:
The temperature in the room where the appliance is located conforms to the climate
•
class stated on the appliance's rating label.
Maximum ambient relative humidity: RH75%.
•
The appliance must be placed at a sufficient distance from heat sources ( e.g., ovens,
•
central heating, direct sunlight, etc.).
The appliance must be located in such a place that it is protected against the effects of
•
weather.
Regular maintenance is performed according to the instructions in this user's manual.
•
The ventilation openings on the appliance must not be covered.
•
Correct installation ( e.g. leveling, the capacity of the system corresponds to the
•
specifications on the rating label of the appliance).
COMMANDS
"
" button to turn the unit ON and OFF, press and hold this button for approximately
•
3 seconds.
"
" button Energy conservation button: Pressing this button for 3 seconds will turn
•
the energy conservation mode ON or OFF. In this mode, the LED light and display will
turn off, and the ° C/° F light will be on.
"
" indicator light: shows that the compressor is in operation.
•
"
" button: used to increase (warm) the temperature in steps of 1° F (or 1° C).
•
"
" button is used to decrease (cool) the temperature in steps of 1° F (or 1° C).
•
"°C/°F" button : press this button to switch the indicator light between° C/° F.
•
"
" button: turns the interior light ON and OFF. If you use this button, the light is no
•
longer controlled by the switch, and remains ON.(Light button deactivated when Energy
conservation button is on) LED display Display screen shows the temperature setting.
22
Publicité
