Publicité
Instructions for installation
1.2. Tools required
● Hammer with a wooden head or a mallet
● Cordless screwdriver with bits for cross-head screws and Torx
● Roller tape measure
● Drill bits with a diameter of 3 mm, 10 mm, 20 - 30 mm (for sauna heater
power cable)
● Spirit level
● 1.5 mm hexagonal socket wrench
● Utility knife
● Ladder
This symbol indicates tips and useful information
Back-to-front assembly
Pre-drill
Carry out wiring
Cut to real measurement with saw
Check the right angle:
80 cm
p. 4/16
Publicité
