Publicité
Cover Removal and Installation
Warnings:
- DO NOT remove or install the cover while the individual is in the wheelchair.
- DO NOT use the product without the cover, the foam pad, and the air insert or foam insert.
- Inspect the cover for damage and replace if necessary.
To Remove the Cover:
1. On the back and bottom side of the shell, pull
p
the cover fla
to release the cover from the
fastener strip.
To Install the Cover:
1. At the top of the shell, slide the attachment flap
through the cover attachment slot. Press the
fastener strip on the shell and the attachment
flap together to secure the cover. Flip the cover
over the top of the shell.
ROHO AGILITY CARBON Contour Back Support Operation Manual
2. Pull the cover away from the shell, releasing it
from the fastener strips on the front side.
2. Fold the cover flap over the top of the shell and
press to fastener circles. Make sure the zipper
side of the cover faces the shell, and press to
attach the cover to the fastener strips on the
front side of the shell.
12
3. Flip the cover over the top of the shell. Release the
attachment flap from the fastener strip. Pull the flap
through the cover attachment slot to remove the
cover.
3. Pull the bottom end of the cover over the bottom
edge of the shell. Press the fastener strip on the
shell and the cover flap together to secure the
cover.
Publicité
