Publicité
EN
Location of Controls
1
2
3
4
7
6
8
9
10
10. Seal: In standby mode, press "Seal" button (indicator flashes) and then press
the seal time from 0-9 seconds. This button works for both smart vacuum mode and customized
vacuum mode. Press "Seal" during vacuuming to seal directly.
11. Stop: During operation, press "Stop" button to stop operation and return to standby.
12. Customized Vac: In standby mode, press "Customized Vac" button to enter customized vacuum mode.
In this mode, you can adjust the vacuum time from 5-80 seconds by pressing
13.
/
: To increase/decrease the vacuum time or sealing time
14. Display:
In standby mode:
•
When powered on, it shows "On".
•
When in protected mode, it shows "CLO".
•
When in smart vacuum mode, it shows
"Au".
•
When pressing "Seal", it shows the seal
time.
4
HT497_ML_A5_v1_20240807.indb 4
1. Gasket: Keeps air away by forming vacuum
2. Sealing strip: Place the bag to be sealed over
3. Bag clip: Fix the bag when vacuum and sealing
4. Sealing bar: Coated heating element which
5. Lid lock: Raise/lower to lock/release the lid.
6. Control panel
7. Pressure gauge: To display vacuum pressure
8. Smart Vac: In standby mode, press "Smart
5
14
13
9. Marinate: In standby mode, press "Marinate"
12
11
During operation:
•
•
•
chamber with gasket. Clean and dry or replace
when dirty, distorted or broken.
this strip. Clean and dry or replace when dirty,
distorted or broken.
heats and seals the bag
Vac" button to enter smart vacuum mode. The
appliance will smartly vacuum according to the
size of bag and stuff.
- If desired, you can adjust the programmed
"Smart Vac" time. In standby mode, press
and hold the "Smart Vac" button for about 2
seconds, the indicator light will flash. Press
and
to adjust the vacuum time in
the range of -10s~+10s. Close the lid and the
machine will vacuum with the set time. To
exit, just press "Stop" button to return to the
normal "Smart Vac" mode.
to enter marinate mode. In this mode, set the
marinate time from 9-99 minutes using arrow
buttons
and
(Every 9 minutes is a
vacuum cycle, which consists of three stages:
vacuum > keep vacuum > release.)
In smart vacuum mode, it shows the vacuum
time and remaining seal time.
In customized vacuum mode, it shows the
remaining vacuum time and seal time.
In marinate mode, it shows the vacuum time and
remaining marinate time.
and
to adjust
and
.
2024/8/7 19:14:12
Publicité
