stress�
Do not hang items on the product�
Always secure the product with sufficient
ballasting�
Never light an open fire near or
underneath the product� Keep the product
away from heat sources�
z Assembly and installation
Please note: Take the product out of its
packaging and remove all packing material�
Check that all package contents are
present�
Check if the product or individual parts are
damaged� If that is the case, do not use the
product� Contact the distributor via the
service address given in the warranty
section�
RISK OF INJURY! Improper
handling of the product may result
in damage to the product�
Use a base with a minimum weight of
50 kg�
Do not place the product on sandy or soft
ground or on loose soil�
Place the product in a suitable base (not
included in delivery) and position in the
desired spot�
Always make sure that the lower part of the
(base) pole
is inserted at least 40 cm
3
deep into the base�
Insert the (base) pole
fasten, following the instructions provided
by the manufacturer of the base�
Make sure the product is firmly fixed in
place�
Position the parasol
pole
(see Fig� A)� Let the (top) pole
3
glide over the (base) pole
Make sure that the snap stud
with the hole
(see Fig� A)�
5
RISK OF TRAPPING/PINCHING!
Take care not to get your hand
trapped�
24
GB
into the base and
3
above the (base)
1
2
(see Fig� A)�
3
is aligned
4
For easy assembly, press down on the snap
stud
while letting the (top) pole
4
over the (base) pole
Make sure the snap stud
the hole
�
5
For easy disassembly, press down on the
snap stud
while lifting the (top) pole
4
until you can remove the pole�
z Opening/closing the
parasol
To open the parasol, push the handle
upwards until the parasol has fully opened
(See Fig� B)�
To close the parasol, pull down the handle
until the parasol has fully closed�
6
z Cleaning and storage
Do not use corrosive cleaning agents,
brushes with metal or nylon bristles or sharp
or metallic cleaning implements such as
knives, hard spatulas or the like� These may
damage surfaces�
The canopy fabric is not washable�
Use only a dry, lint-free cloth for cleaning� If
the product is very dirty, dampen the cloth
slightly�
All parts must be completely dry before
storage�
In winter, store the product in a cool, dry
place� Avoid storing the product in a
heated room�
z Disposal
Note the labels on the packaging
materials when sorting the waste;
they are marked with abbreviations
(a) and numbers (b) with the
following meanings:
1-7:
Plastics
20-22:
Paper and cardboard
80-98:
Composite materials
glide
2
(see Fig� A)�
3
fits exactly into
4
2
6