Publicité
All manuals and user guides at all-guides.com
4 - 19
CYLINDER HEAD
9. Check:
Valve clearance
Out of specification → Adjust.
Refer
to
"VALVE
INSPECTION
AND
section in the CHAPTER 3.
10. Apply:
Engine oil
On camshaft.
11. Install:
Tappet cover 1
18 Nm (1.8 m · kg, 13 ft · lb)
Cylinder head side cover 2
10 Nm (1.0 m · kg, 7.2 ft · lb)
12. Install:
Timing mark accessing screw 1
7 Nm (0.7 m · kg, 5.1 ft · lb)
Crankshaft end accessing screw 2
7 Nm (0.7 m · kg, 5.1 ft · lb)
13. Install:
Spark plug
13 Nm (1.3 m · kg, 9.4 ft · lb)
Engine bracket
40 Nm (4.0 m · kg, 29 ft · lb)
ENG
CLEARANCE
ADJUSTMENT"
Publicité
