Disposal And Recycling; Ordering Replacement Parts - EINHELL WH 2000 I Mode D'emploi D'origine

Chauffage mural
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Anleitung_WH_2000_I_SPK7:_
GB
7.1.6 Ionizer (possible only with the remote
control)
The ionizer is switched on and off with the button (14)
on the remote control.
8. Overheating guard
In case of excessive heating, the heating function
and then the equipment will shut down automatically.
In case of excessive heating, the heating function
shuts down automatically. If this occurs, turn off the
appliance, disconnect the mains plug and wait a few
minutes for the appliance to cool. After eliminating
the cause (e.g. a covered air grille), the appliance
can be switched on again. If the overheating guard
triggers repeatedly, please contact your customer
service center (in Germany ISC GmbH).
9. Cleaning, maintenance and ordering
of spare parts
Maintenance and repair work may only be carried
out by an electrical servicing contractor or your
customer service center.
Check the mains lead at regular intervals for signs
of defects or damage. A damaged mains lead may
only be replaced by an electrician or ISC GmbH in
compliance with the relevant regulations.
Important: Disconnect the mains lead before
cleaning – danger of electric shock.
9.1 Cleaning
Use a damp cloth to clean the casing.
9.2 Servicing
There are no parts inside the equipment which
require additional maintenance.

9.3 Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
10
20.03.2012
13:21 Uhr
Seite 10
10. Storage
Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing
temperature. The ideal storage temperature is
between 5 and 30 °C. Store the electric tool in its
original packaging.

11. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The
equipment and its accessories are made of various
types of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

23.385.03

Table des Matières