Publicité
5. Install the flange and fix it to the blower
plate with the (4) screws. Fig. 5
6. Put the top cover back on.
7. With the aid of a slotted screwdriver, bre-
ak the grommet of circular hole through
which the wires pass. Fig. 6
8. Insert the female connector in the ter-
minal box already attached to the hood.
Fig. 7A
Pass the wires of the remote motor throu-
gh the terminal box hole and connect
them to the connector wires. Fig.7B
Note: Carry out the power supply connec-
tion in accordance with the national
electric code, ANSI/NFPA 70-1999.
Note1: A cable lock (not included) may be
required by local codes. Please review
local codes for more information.
- 15 -
Publicité
