Publicité
en-us Customer Service
Place hose clamp around end of drain hose BEFORE
1.
connecting to the plumbing.
If you have a garbage disposal, connect the drain hose
2.
to the garbage disposal with either a high loop or an air
gap.
If you do not have a garbage disposal, connect the
3.
drain hose to the drain connection with either a high
loop or an air gap.
Insert the included drain hose adaptor before
4.
connecting to the plumbing.
14
Tighten the hose clamp around the house plumbing.
5.
5.3 Electrical Connection and Test Cycle
For wall outlet connections, plug the dishwasher into the
1.
outlet.
Turn on power supply.
2.
Make sure the water supply is on.
3.
Turn the dishwasher on and run a test cycle for 15
4.
minutes.
Check to make sure the cycle operates and there are
5.
no leaks while it is running.
Stop the cycle and turn off the dishwasher.
6.
Your installation is complete.
7.
6 Customer Service
Customer Service
With any warranty repair, we will make sure your
Customer Service
appliance is repaired by an authorized service provider
using genuine replacement parts. We use only genuine
replacement parts for all repairs.
Detailed information on the warranty period and terms of
warranty can be found in the Statement of Limited Product
Warranty, from your retailer, or on our website.
If you contact Customer Service, you will need the model
number (E-Nr.) and the production number (FD) of your
appliance.
USA:
1-877-442-4436
www.gaggenau.com
www.gaggenau.com/us/appliances/eshop
CA:
1-877-442-4436
www.gaggenau.com
www.gaggenau.ca
6.1 Model number (E-Nr.) and production
number (FD)
You can find the model number (E-Nr.) and the production
number (FD) on the appliance's rating plate.
The rating plate is located inside the appliance door.
Publicité
