Publicité
OUTDOOR WALL MOTOR WA511C
Assembly
Connection diagram
1. Determine positioning.
2. Chip a hole of the desired diameter.
3. Seal the motor housing by filling the gaps with foam from the inside.
4. Connect cables and ducting.
5. Any cracks that appear should be sealed with foam.
The outdoor wall motor is equipped with a non-return valve.
Please note: NEVER switch the covers!!!
Black
(230V)
Blue
(null voltage)
Yellow/Green
(earth)
Red
(PWM)
Wit
(PWM)
Connector has position indication
Numbering of the 5-core cable
Black
(230V)
Blue
(null voltage)
Yellow/Green
(earth)
Red
(PWM)
Wit
(PWM)
EN 7
Publicité
