Publicité
Thunderbolt
4 / USB-C Dual Display Docking Station + Power Delivery 96W
TM
In Windows, the LAN port appears in Start → Control Panel (View Small Icons) → Device
Manager → Network Adapters as "Realtek RTL8153". Audio ports can be found in Start →
Control Panel (View Small Icons) → Device Manager → Audio, Video and Game Controllers
as "USB Advanced Audio Device" and/or according to the connected monitor (e.g. in Fig.
"LG Ultra HD (Intel
Display Audio)").
®
The installed ports are shown in macOS X as "TB4DUALDOCKPD" in "About This Mac" →
"System Profiler" → "Hardware" → "Thunderbolt".
CONNECTING THE DISPLAYPORT MONITOR
Use an HDMI cable or Thunderbolt™ cable to connect the monitor to the docking station.
The monitor may flicker on the laptop/tablet during installation of the additional monitor,
which is a standard condition. The dock supports a maximum of two monitors. Graphics
interface: 1x HDMI and 2x Thunderbolt™ 4
HDMI
1 monitor connected via 1 DisplayPort cable - resolution up to 8K 7680x4320/30Hz
8K resolution is only supported if your laptop's Thunderbolt™ 3 connector supports
If the Thunderbolt™ 3 only supports DisplayPort 1.2, the maximum resolution is 5K
If Thunderbolt™ 3 only supports DisplayPort 1.2, the maximum resolution is 5K
2 monitors connected simultaneously 2x DisplayPort,
resolution up to 4K 4096x2160@60Hz
The resolution, the frame rate and the maximum number of connected external monitors
depends on the capabilities of the host PC/laptop.
8 |
ENGLISH
TB4
TB4
DisplayPort 1.4.
5120x2880/60Hz
5120x2880/60Hz
HDMI
TB4
TB4
USING THE DOCKING STATION IN WINDOWS
1. Right-click anywhere on the free screen and select View Settings
2. You will then see the settings for Display Resolution from Windows.
You can now make the Extend and Mirror/Duplicate settings:
• Extend mode: on the screen, select for Multiple monitors → Extend this view → OK.
• Mirror mode: on the screen, select Multiple monitors → Duplicate this view → OK.
Check the "Set this monitor as main" box to select the additional monitor as the main
monitor.
Click and drag the second monitor to position it relative to the original monitor of your
laptop/tablet as required.
Placement of one additional monitor in relation to the original laptop/tablet monitor
ENGLISH
Display resolution in Windows 10
Quick Start
ENGLISH
| 9
Publicité
