Publicité
Thunderbolt
4 / USB-C Dual Display Docking Station + Power Delivery 96W
TM
• 1x USB 3.1 port gen. 2 with fast charging support (BC 1.2)
• 3x USB 3.1 port gen. 2
• 1x Ethernet 2.5GLAN RJ45 port (Realtek RTL8156)
• 1x SD slot
• 1x 3.5mm Audio combo jack
• 1x power input (20V/6.75A)
• LED indication
• Support for Kensington lock
• Thunderbolt™ 3 cable (70cm)
• OS: Windows 10/11, macOS and Linux with latest updates
• Product dimensions: 200 x 75 x 30 mm
• Product weight: 446 g
SPECIFICATION AND DESCRIPTION
Front panel:
1. SD Card Reader
2. USB 3.1 port gen. 2 with fast charging support (BC 1.2)
3. 3.5mm Audio combo jack
4. Thunderbolt™ 4 data port / Power Delivery - for connecting the dock to a laptop's
Thunderbolt™ 3/4 port or for connecting a Thunderbolt™ 3/4 / USB-C device to the dock.
5. LED indication
6. ON/OFF switch to turn the docking station on and off
Rear panel:
7. Power input (20V/6.75A)
External power supply exclusively for use with the TB4DUALDOCKPD.
8. HDMI 2.1
9. 2x Thunderbolt™ 4 data port
10. Ethernet 2.5GLAN RJ45 port (Realtek RTL8156)
11. 3x USB 3.1 port gen. 2
6 |
ENGLISH
SYSTEM REQUIREMENTS
Hardware requirements: Device with a free Thunderbolt, USB4 or USB-C port
Power Delivery requirements: Device with a free Thunderbolt, USB4 or USB-C port with
"Power Delivery" support
Video Output Requirements: Device with a free Thunderbolt, USB4 or USB-C port with
"DisplayPort Alternate Mode" support
Operating System: Windows 10/11, macOS and Linux with latest updates
To play Ultra HD 4K/5K/8K video, the computer must be able to decode the video with its
GPU. Especially for less powerful laptops, it is true that they can handle 4K/5K/8K video
playback, but the result is not ideal (interruptions, video tearing).
INSTALLING THE DRIVERS
The docking station can be connected directly, the drivers are included in the operating
system. For Windows 10, please make sure that you have the latest Thunderbolt™ 3 drivers
from your laptop manufacturer installed in your computer.
HARDWARE INSTALLATION (CONNECTING THE DOCKING STATION TO LAPTOP / TABLET)
1. Turn on your laptop/tablet and connect the power adapter to the docking station.
2. Plug the power adapter of the docking station into a 110V/230V AC power supply.
3. Plug the Thunderbolt™ 4 cable into the Thunderbolt™ 4 port on the rear panel of the
docking station.
4. Plug the other end into an available Thunderbolt™ 3/4, USB4 or USB-C* port on your
laptop/tablet.
5. In Windows OS, enable a new Thunderbolt™ 4 device - see image
6. In Linux, enable the new Thunderbolt™ 3 device. Must be displayed as Enabled
7. Subsequently, the automatic installation of ports in each system starts.
8. After finishing installation, we recommend that you restart the laptop / tablet.
ENGLISH
Quick Start
ENGLISH
| 7
Publicité
