Publicité
Getting Started
Connections
Connector
SIDE AV
SIDE AV
HEADPHONE
HEADPHONE
NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection.
See the illustrations above. You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via VGA input.You cannot use
VGA and YPbPr at the same time.To enable PC audio, you will need to use the SIDE AV CONNECTION cable's WHITE & RED inputs.
If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.When receiving DTV channels
(Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket. When using the wall mounting kit
(optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall.Insert or remove the CI
module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the settings
Type
Scart
Connection
(back)
VGA
Connection
(back)
PC/YPbPr
Audio
Connection
Side Audio
(side)
YPbPr or PC Connection Cable
(Not supplied)
HDMI
Connection
(back)
SPDIFF
Connection
(back)
Side AV
(Audio/Video)
Connection
(side)
Headphone
Connection
(side)
YPbPr Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
DC 12V Input
English - 5 -
Cables
(Not supplied)
Device
.
Publicité
