Publicité
through the available sources by pushing the button
up or down.
To turn the TV off: Press the middle of the button
down and hold it down for a few seconds, the TV will
turn into standby mode.
Inserting the Batteries into the Remote
Lift the cover on the back of the remote upward gently.
Install two AAA batteries. Make sure to match the +
and - ends of the batteries in the battery compartment
(observe the correct polarity) Replace the cover.
Connect Power
IMPORTANT: The TV set is designed to operate on 12 V
DC. For this, an adaptor is used which gives 12 V voltage.
Connect this adaptor to a system that supplies 110-240V
AC, 50/60Hz
Antenna Connection
Connect the "aerial" plug to the AERIAL INPUT (ANT)
socket located on the back of the TV.
Notification
Manufactured under license from Dolby Laboratories.
TRADEMARK ACKNOWLEDGMENT
"Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
"HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or
registered trademarks of HDMI
Licensing LLC."
Information for Users on Disposal of Old
Equipment and Batteries
[European Union only]
These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the product
or battery, please consider the collection systems or
facilities for appropriate recycling.
Notice: The sign Pb below the symbol for batteries indicates
that this battery contains lead.
Specification
TV Broadcasting
Receiving Channels
Number of Preset
Channels
Channel Indicator
RF Aerial Input
Operating Voltage
Audio
Audio Output Power
(WRMS.) (10% THD)
Power Consumption 35 W
Weight
TV Dimensions
DxLxH (with foot)
TV Dimensions
DxLxH (without
foot)
Operation
temperature and
operation humidity:
English - 3 -
Battery
Products
PAL B/G D/K K
VHF (BAND I/III)
- UHF (BAND U) -
HYPERBAND
1000
On Screen Display
75 Ohm (unbalanced)
110-240V AC, 50/60Hz.
German+Nicam Stereo
2 x 2,5
3,60
134 x 451 x 331
54 x 451 x 296
5ºC up to 45ºC, 85%
humidity max
Publicité
